CableIQ Qualification Tester Kit - CIQ-KIT
The CableIQ Qualification Tester Kit - CIQ - KIT from Fluke Networks is a copper qualification tester capable of troubleshooting and qualifying Ethernet network cabling speed (10/100/1000/VoIP).
- Works on live networks to provide Ethernet switch detection and device configuration
- Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
- Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
- Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
- Tests all copper cabling media: twisted-pair, coax, and audio
- Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
Perfect as a copper cable tester, copper cabling troubleshooting tool and as a wiremap tester.
CableIQ Advanced IT Kit Includes:
CableIQ main unit with remote adapter, CableIQ Reporter software CD, IntelliTone 200 Digital Probe, Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax 'F' push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries, test accessory soft pouch, duffel style bag.
Got any questions? Call 01403 756588 during office hours to speak to a team member about the FLUKE NETWORKS CABLEIQ TESTER KIT.
Features
- Bandwidth Qualification
- Cable Troubleshooting
- Infrastructure Discovery
- Intelligent Wiremap
- IntelliTone Technology
- Easy-to-use
Cable types supported |
UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
Supported tests |
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
Wiremap |
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
Find fault |
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
Results storage |
Up to 250 qualification test results |
Power |
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
Battery life |
20 hours of typical use, without backlight |
Other battery types supported |
4AA photo lithium, NIHM, NICAD |
Dimensions and weight |
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |